Control Box Digital Output
Warning
- Before connecting the Control Box Digital output port, the power should be turned off.
1. Digital output internal circuit diagram [DO00 ~ DO15]
Device configuration that performs Control Box Digital output (DO00-DO15).
There is internal GND terminal, and it should be connected to GND of external sensor and equipment to be connected.
2. Digital output device usage [DO00 ~ DO15]
How to use RB Control Box Digital Output Device (DO00-DO15).
How to use a single digital output.
Vbb power is supplied inside of the control box and its output is the source.
3. Digital output characteristics [DO00 ~ DO15]
| Terminals | Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| DO00 ~ DO15 | Voltage | - | 24 | - | V |
| DO00 ~ DO15 | Current | 0 | - | 1 | A |
| DO00 ~ DO15 | Function | - | PNP | - | Type |
Single channel 1A is possible, but the total current of all channels must be less than 2A
4. Test environment
Digital output device test was conducted using 24Vdc LED and the following configuration was tested.
