Control Box Maintenance
Dust in the control box may cause it to over-heat or generate electrostatic.
These can potentially damage the control box. It is required to regularly clean up dust in the control box.
Maintenance Period
The control box requires an inspection and clean-up at least once per 6 months. Depending on the environmental condition around the robot, the period may differ.Maintenance Instructions
- Turn off the control box.
- Remove the cover of the control box.
- Check if there is any dust accumulated inside the robot control box.
- If dust is present, carefully remove it using a vacuum cleaner or similar tool.
- Check that all wires are connected properly.
- Turn off the control box.