Skip to content

Robot Control Box On/Off

Caution

  • Our control box uses AC 100-240V single phase (50-60Hz), DC 48V.

Procedure for turning control box On/Off is as follows.

  • Control box On

    1. Press the AC/DC power switch at the bottom of the control box to apply AC/DC power.
    2. Press the main power switch at the top of the control box to turn on the main power.
    3. The message "Please Wait" will appear on the LCD screen of the robot control box. This indicates that the control box is in the initial booting state.
    4. Once the control box becomes ready for use, the LCD message will change to "default."
  • Control box Off

    • To turn off the power, press the main power switch during few seconds.